Silver is a beautiful,
versatile metal, and its soft luster adds a
touch of elegance to
dishes,
flatware, and
jewelry.
Unfortunately, silver is also pretty fragile
compared to many more commonly-used metals, and
it can quickly develop tarnish, stains, or
scratches. It can also be a bit scary to try to
clean silver pieces, because they are often
special to us, and we don't want to damage them.
You don't have to be a silversmith to clean
silver though. Here are some tips to help you
keep your silver
shining.
Tarnished
silver.
STEPS:
- Clean your
silver often, and clean it promptly
after use. Silver that is frequently
used rarely has tarnish problems. When
tarnish is not yet present, or when it's
just beginning to develop, simply wash
your silver in warm (not hot) water with
a gentle, phosphate-free detergent.
- It's a
good idea to wash silver separately
from your other dishes
because metal
sinks and
utensils
can scratch silver, and stainless
steel can damage the finish if it
comes into contact with your silver.
- Avoid
using rubber gloves when washing
silver, as rubber corrodes silver. (Unlike
the pictures you will see here,
where rubber gloves were worn) Use a
soft cloth to gently rub the silver
clean, and dry promptly with a soft
towel. Gently buff the shine into
dull silver with a soft cotton cloth.
- Prompt
cleaning is especially important
when the silver has been exposed to
certain foods containing sulfur, or
those which are acidic or salty. In
particular, common foods such as
table salt,
eggs,
some fruits, onions,
mayonnaise,
and vinegar
are harmful to silver. When possible
use a plastic or glass insert when
serving these foods in serving
dishes. In any case, wash your
silver right away or at least rinse
it well with warm water, and don't
leave silver sitting in dishwater
that may contain traces of these
foods.
- Polish your
silver. When tarnish develops on silver,
simple hand washing may not suffice to
remove it.
Specially formulated silver polishes are
your safest option for polishing silver,
especially if you are dealing with an
antique or a piece that has intricate
designs etched into it. Follow the
manufacturer's directions carefully.
-
-
+Moisten a
soft silver-polishing cloth or the
sponge included with the silver
polish and take a little bit of
polish.
-
-
Take
a
bit
of
polish.
+Rub the silver only in straight-line,
back-and-forth motions (not in circles). Avoid scrubbing;
rather, let the polish do the job.
-
-

Rub the silver gently.
+Rinse the silver under running
water.
-
-
Rinse under running
water.
+Dry the silver completely with a
soft, clean cloth.
-
-
Dry.
- Consider using
common household products for less rare
or less valuable pieces. They will
usually work, but may cause damage.
Try them at your own risk.
-
Toothpaste:
Select a plain white toothpaste (not
a gel) without the special whitening
options.
- Take a
soft, dampened cloth (old t-shirt
scraps work just fine) or a damp
sponge and put some toothpaste
on it. Gently rub over the
silver in straight, back-and-forth
motions. Alternatively, you can
wet the silver piece and gently
apply toothpaste
directly to the surface which
you can then wet again and
proceed to polish. In any case,
be very gentle, and if you
notice scratching at any point,
stop and rinse the toothpaste
off.
- As the
cloth or sponge becomes dark
with tarnish, add more
toothpaste to a clean part of
the dampened cloth/sponge and
continue gently polishing.
- Rinse
thoroughly with warm (not hot)
water and dry with a soft towel
Baking soda: Baking soda may remove stubborn tarnish, but don't use
it unless you don't mind the risk of damaging the silver. Baking soda
is generally considered too abrasive for use on silver.
-
-
The baking soda, hot
water and silver cause a
minor chemical reaction,
don't breathe in the
fumes.
-
-
- Make a
paste of baking soda and warm
water.
- Gently
polish following the directions
for toothpaste above.
- Give your
silver a bath. Commercial silver "dips"
are available which can dissolve stains
without rubbing the silver. Contrary to
what the word "dip" implies,
professionals rarely actually soak
silver in these products, at least not
for long. Dips are generally harsh,
potentially dangerous chemicals (both to
the silver and to yourself), so follow
the directions carefully and consult a
professional when in doubt. You can,
however, make a gentle homemade silver
bath that gets rid of stains and tarnish
by an electrochemical reaction. Be aware
that both dipping and electrochemical
baths can potentially damage your silver,
and they will remove desirable patina,
so they're not recommended for silver
with an oxidized or French gray finish.
- Heat up an
appropriately sized container of
water and dissolve a large amount of
table salt into the water. Use
enough salt such that it takes at
least a minute to dissolve in the
hot water with constant stirring.
Washing Soda (such as Arm and Hammer)
works as well.
- Shape a
liner for the container from
aluminum foil and place the foil in
the container of hot water (danger--do
not touch the hot water!).
- Place
silver that has been previously
cleaned with soap into the bath
(inside of the foil) for several
minutes. Tarnish should dissolve
away.
- For
stubborn spots, remove and clean
with soap and a damp rag before
reimmersing in the bath.
- Warning:
This will remove any tarnish, even
the antique-y ones.
Dispose of salt water down the drain
after cooling. This is a simple
reaction between the aluminum metal
and the silver sulfide (tarnish).
The table salt acts as an
electrolyte to allow the reaction to
happen.
- Store your
silver correctly. Beyond prompt and
frequent cleaning, the best way to
preserve your silver is to store it
correctly. Make sure each piece is
completely dry before storing it. For
silverware, wrap each piece in acid-free
tissue paper or anti-tarnish paper. You
can also wrap pieces in flannel (special
flannels are made just for this purpose).
Seal the wrapped silver pieces in an
airtight plastic bag. Whether you put
away your silver in a bag or you put it
in a display case, a canister of silica
gel placed nearby can help reduce
humidity and ward off tarnish. Never
store silver where it can contact rubber,
stainless steel, or paint.
TIPS:
- +Don't put
silver in the dishwasher!
Yes, it's possible to put silver in the dishwasher
without any ill effects, but only if you
do everything just right and you're
lucky. Just don't chance it. It's also
worth considering that the desirable
patina that can develop on silver is
encouraged by gentle friction, which
hand washing will provide but which the
dishwasher will not.
- +Avoid wearing
silver jewelry
in swimming pools.
The chlorine
can damage the silver in a short time.
- +To polish
silver with intricate etchings and deep
crevices, you may use a soft-bristled toothbrush.
Wet the bristles with warm water first
to soften the bristles further. On the
other hand, you may wish to leave a bit
of tarnish in the crevices to bring out
the design.
- +For sterling
flatware, the best way to keep it
beautiful is use it on a regular basis
and gently wash and dry it with gentle
dish soap and water. If it's not in
storage for a long time, it doesn't have
a chance to tarnish deeply.
- +Try a vacuum
sealer to vacuum pack pieces of cleaned
silver. Foodsavers work well.
- +Many stores
and catalogues that sell silver will
also sell anti-tarnish silver chests
lined with treated felt, or just the
anti-tarnish cloth itself. These cloths
lengthen the amount of time needed
between polishings, but you still need
to do it! They also (obviously) are
great for storage, as they keep the
pieces from being banged around too much.
If your silver chest doesn't have a
drawer for serving pieces, you can just
wrap them in a piece of anti-tarnish
cloth and put that in a regular box.
WARNINGS:
- +For silver
with an oxidized or French gray finish,
or for any valuable piece, you're better
off sticking to gentle hand washing and
commercial silver polishes. It's safest
to have truly special pieces
professionally cleaned.
- +Avoid
abrasive cleaners. Using baking soda
or toothpaste is already a stretch. You
run the risk of scratching your silver.
Anything more abrasive than those
products will almost certainly result in
damage.
- +Silver
polishes and dips may contain harmful
chemicals. Follow instructions and heed
the manufacturer's warnings.
- +The aluminum-foil
method sounds mild and harmless but can
result in pitting that gives your silver
an orange-peel texture overall. Go by
stages, and use a soft clean cotton
cloth to rub away the damp aluminum
sulfate that collects on the surface of
the silver, before you decide it's not
working.
- +Even though
it's metal, silver plate can be rubbed
right off if you're too diligent with
your silver polish. Be sure the dark
smear is actually tarnish and not the
base metal beginning to show through.
- +Research
cleaning silver coins (or any coins for
that matter) before doing so, as it can
greatly reduce their value.
SAVARONO SALES TEAM
|